Unisco Flash Core’s new generation of enterprise-level SATA SSD product series E1200 is released: maximum 7.68TB, core devices are domestically produced

Passionategeekz On June 25th, Unigroup Flash today released a new generation of enterprise-level markets SATA SSD Product Series E1200the scenarios such as data center, cloud computing, edge computing, etc. provide “storage Chinese” solutions.

Through the design innovation of firmware algorithms, the E1200 product series measured sequential read performance of 550MB/s, sequential write performance of 530MB/s, random read performance exceeded 95K IOPS, random write performance reached 50K IOPS, and random read and write delays were less than 100μs and 20μs respectively.

In terms of reliability,The E1200 product series uses 3D TLC NAND with intelligent wear and balance technologyand achieve the durability standard of daily total disk writes (DWPD) ≥1. Through end-to-end data path protection and LDPC error correction algorithm, its non-correcting bit ratio (UBER) is less than 1e-17. Combined with algorithm optimization such as heavy architecture GC (garbage collection), WL (wear equalization), Trim and other algorithms, the average product failure interval time (MTBF) can reach 2.5 million hours.

Passionategeekz learned from the introduction of Unigroup Flash Core that as an enterprise-level SSD product for enterprise-level and data centers, the E1200 product series supports SATA 3.0 protocol and 2.5’SATA interface.The controller, NAND particles, DRAM and other core devices are all designed in the domestic design.realizes complete autonomous control from hardware to firmware.

In terms of system compatibility and scalability,The E1200 product series is in standard 2.5-inch formcompatible with mainstream server architecture, has extensive compatibility with X86 (Intel & AMD), domestic platforms (Haiguang, Kunpeng, Feiteng, Loongson, Shenwei, Zhaoxin, etc.), and supports Windows, Linux and domestic (Kirin, Tongxin, etc.) operating systems, and has hot plugging, online firmware upgrade and other functions to meet the expansion and upgrading needs of data center systems. In addition, the product supports SM2/3/4, AES, SHA, and RSA encryption algorithms.

E1200 product series provided 480GB、960GB、1.92TB、3.84TB、7.68TB Capacity selection; built-in SMART tool supports real-time prediction of hard disk performance, health, temperature and other usage status, and can predict faults in advance.

In terms of power consumption management, the E1200 product series adopts dynamic power consumption adjustment technology, with standby power consumption less than 1.4W and active power consumption less than 3.2W. Dynamic power consumption adjustment technology improves the energy consumption ratio.

Advertising statement: The external redirect links (including, not limited to, hyperlinks, QR codes, passwords, etc.) contained in the article are used to convey more information and save selection time. The results are for reference only. All articles from Passionategeekz include this statement.